LOTUS ELISE 250 CUP
TARGET SPECIFICATION Power – Ultra Lightweight – High Performance – Aerodynamic Efficiency Sourced: lotuscars.com; Styled By: Chariot OBM
- Home
- Video
Video
V Weave Rear Spoiler
What is V Weave? It is the application of Twill Weave Creates a diagonal, chevron, hounds tooth, corkscrew, or other design. The design is enhanced with coloured yarn that is strong and may develop a shine. Twill weave is characterized by diagonal ridges formed by the yarns, which are exposed on the surface. These mayYour Read More Link Text
Difference between Dry & Wet Carbon Fiber Car Parts
Dry Carbon: Manufactured using resin pre-coated sheets of carbon fibre in an autoclave. This process produces a product that is less sensitive to the effects of UV rays and temperature. While it is more costly to produce, it makes for a thinner product that is then polished and clear coated to produce a high glossYour Read More Link Text
Quality Carbon Fiber Car Parts
Good quality Carbon fiber Car Parts Crashworthiness. The energy absorption capability of composite material is important in developing improved human safety in an automotive crash. In passenger vehicles, the ability to absorb impact energy and be survivable for the occupant is called crashworthiness of structure. The crashworthiness in terms of specific energy absorption of carbonYour Read More Link Text
Compression Molding
The molding process uses the characteristics of each stage in the resin curing reaction to realise the product molding, that is, the molding material plasticizes, flows, and fills the mold cavity, and the resin is cured. In the process of filling the mold cavity with the molding material, not only the resin flows, but alsoYour Read More Link Text
Autoclave Dry Carbon Products Production – Vacuuming
As a composite manufacturing process, vacuum bagging provides compaction pressure and consolidation of plies within the laminate. It is also known as an extended version of hand lay-up process and vacuum bag molding. In this process, the mold base is kept horizontally, and the prepreg composites are placed in equal distribution into the mold base.Your Read More Link Text
Autoclave Dry Carbon Products Production – Molding
Autoclave molding is typically used in the carbon fiber sportscar industry for the production of high-value composites from prepregs. The laminate, which is covered on both sides by a fine polyester cloth peel-ply (for enhancing surface effect) is built up on the mold surface. The top surface of the laminate is covered by a porousYour Read More Link Text
Carbon Fiber Car Parts Factory
The factory covers an area of 70000sqm and belongs to the private property of the company. It passed IS09001 And TS16494（ Originally, there was no strict standard in the carbon fiber aftermarket tuning parts, through cooperating with OE brand clients and get the successful standard for carbon parts and become the key vendor for theseYour Read More Link Text
Wet Carbon Fiber Car Parts Production
Wet carbon fiber is the carbon fiber that has that overall glossy finish to it. Generally, wet carbon fiber can be produced mainly in one of two ways: painting or infusion. Painting: No matter how carbon fiber is made, there are certain quality controls in the manufacturing to ensure that it doesn’t just fall apart.Your Read More Link Text
- 1
- 2
