All posts by: zerotong

About zerotong


TARGET SPECIFICATION Sourced: Power and performance Power (hp) from 600 Battery (kWh) 100+ Top speed (km/h / mph) c. 260 / 161 0-100km/h (secs) Less than 3.0 Max range WLTP (km / miles) c. 600 / 373 Dimensions (mm) Length 5,103 Width with Electric Reverse Mirror Displays 2,135 Width with door mirrors 2,231 HeightYour Read More Link Text

Read More

Carbon Fiber K Grades Explained

Seeing “3K” or “12K” in an advertisement can make a buyer scratch their head with confusion. Let’s have a closer look into the meaning of K. About K You have probably heard about 3K and 12K carbon fiber. In addition to that, there are 1K, 2K, 6K, 24K and so on. To understand them better,Your Read More Link Text

Read More


TARGET SPECIFICATIONS Sourced: Name Lotus Evija (Type 130) Powertrain Pure electric, 4WD Power The target is to be the most powerful production car in the world, at 2,000 PS Battery power 70 kw/h / 2,000 kW Torque 1,700 Nm with torque vectoring 0-100 km/h (0-62 mph) Under three seconds 0-300 km/h (0-186 mph) UnderYour Read More Link Text

Read More

Chariot Forged Wheels For Lotus

Analysis and comparison between the forged aluminum wheel and steel wheel : steel wheel Forged aluminum rim Steel wheel rim Competitive results 1. Weight 24 kg 49kg Aluminum rim half-light 2. Materials 6061 high strength alloy aluminum steel plate The aluminum wheel rim has high comprehensive mechanical strength. 3. Manufacturing style It is formed byYour Read More Link Text

Read More

Carbon Fiber Side Scoops For Lotus

A passive aerodynamic device for reduced drag can be to provide a desirable shape for the purpose. A side scoop for air inlet is used as an inlet with high efficiency and very low additional drag for the vehicle. It must be located in an area with thin boundary layer and it should be orientedYour Read More Link Text

Chariot Design, Lotus, Motorsports

Carbon Fiber Diffuser For Lotus

An automobile diffuser is traditionally used as a downforce generator, but it can also be effective for drag reduction for some types of bodies. The overall idea and function are that a cross-sectional area increases in the flow direction, producing a decrease in fluid velocity from inlet to outlet; with a corresponding increase in staticYour Read More Link Text

Chariot Design, Lotus, Motorsports

EXIGE S V6 Rear Spoiler /GT Wing

The rear spoiler / GT Wing is used to increase the amount of downforce to the rear tires. Increasing this downforce increases the normal force between the tire and track surface, which theoretically should increase the potential to use the engine power to accelerate the car. If there is little normal force then there isYour Read More Link Text

Read More

Carbon Fiber Front Splitter For Elise & Exige

Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. Splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper. This splitter extends straight out, parallel to the ground, and can be made ofYour Read More Link Text



TECHNICAL SPECIFICATION  Sourced: Price range Starting at less than £60,000 (less than €72,000) Dimensions Length 4,412mm; width 1,895mm (mirrors folded); height 1,225mm; wheelbase 2,575mm Petrol engines 2.0-litre in-line four-cylinder / 3.5-litre V6 Transmissions Manual, automatic and DCT Power output 360-400hp Maximum torque 430Nm Acceleration (0-62mph / 0-100km/h) Less than 4.5 seconds Top speed UpYour Read More Link Text

Read More

Evoking the spirits of motor racing

Racing means much more: it’s where innovations are born. “Being directly involved in motorsports makes an invaluable contribution to our products and our brand.” To deliver continually enhanced engine components that excel in the most demanding driving conditions, you have to prove them in an even more extreme environment. And there is no tougher testYour Read More Link Text

Read More
  • 1
  • 2